Lifting equipment

Concrete block grab (lifter)

To lift and move a concrete block, a concrete block grab is used. It is attached to the lift with a chain and the concrete blocks are lifted/moved with it. Depending on the dimensions of the block, we can offer you grabs with a working width of 40, 60 or 80cm.

Single lifting beam for grab

This beam is mounted between the lift and the gripper. The beam is placed on the forks of the forklift and the gripper is mounted to it. In this way, the gripper is held stably even in a non-rotating horizontal position.

Double lifting beam for grab

This beam is mounted between the lift and the grab. The beam is placed on the forks of the forklift and the grab is mounted to it. In this way, the grab is held stably and in a non-rotating horizontal position. With a double lift beam, the grab can be mounted to the lift both lengthwise and crosswise.

Lifting eye for anchors

This lifting eye is used to lift and move a concrete block. It is hooked onto an anchor in the block. Two eyes are usually used to lift a block, as the block usually has two lifting anchors for stability during lifting.

Lifting chain for lifting eyes

A lifting chain is used to lift concrete blocks with a forklift or crane. This chain has two hooks that attach to the lifting eyes.

Lifting chain for lifting paving slabs

This chain is designed for lifting and moving paving slabs.